Chapter 5: System operation
128 Full Feature handset operation (SDU)
To select the Logon Policy
Select Logon Policy to display or change the logon policy.
Use
B and E to toggle between Automatic and Manual.
• Automatic: The system automatically logs on when it is powered.
• Manual: When the system is powered, you have to enter the Logon
menu to log on to the system.
To modify the list of Preferred GESs
Select H
+
GES to view or change the list of preferred GESs for H
+
transmission.
The H
+
GES list is a list of the preferred GES operators to use as gateway to
the terrestrial network.
Do as follows:
•To add a GES to the list, press
GD, scroll through the list of known
GESs and use
C to select the GES you want to add.
•To delete a GES from the list, scroll to the GES you want to delete and
press
GF.
•To change the priority of a GES, scroll to the GES you want to change
and press
GB. Use B or E to move the GES to the right
priority and press
C.
• To assign the same priority to two GESs, scroll to the GES you want
to change (GES 1)and press
GB.
Using
B or E, move GES 1 next to the GES with the priority you
want (GES 2), so that they are both visible in the display.
Then press
S. The two GESs should now both have the priority of GES
2.
The list of preferred GESs is typically selected during system
installation. If the GES list is empty, the system will automatically
select the most suited satellite and a random GES.
Priority no. 1 is the highest priority!
To Next Page
