Chapter 5: System operation
MCDU operation 155
5555
SETTINGS
The SETTINGS view contains the following items:
• LOGON POLICY indicates the current logon policy. The available
options are:
• AUTOMATIC
• MANUAL
Changing this setting takes effect immediately, but does not trigger a
log on or log off. Hence, if the system is not logged on and the logon
policy is changed from manual to automatic, the user must enter the
LOGON view and select AUTO LOGON to logon the system.
• Pref. H+ GES allows configuration of the user preferred GESs. This
view lists the user prioritized GESs. The order and prioritization defines
which GES the system will attempt logon with logon policy automatic.
This list is typically configured during installation.
• PREF. ISDN LES allows configuration of the user preferred LESs for
ISDN use. This view lists the user prioritized LESs for ISDN usage. The
order and prioritization defines which LES the system will use for ISDN
when the system is logged onto an I3 satellite. This list is typically
configured during installation.
• PREF. MPDS LES allows configuration of the user preferred LESs for
MPDS use. This view lists the user prioritized LESs for MPDS usage. The
order and prioritization defines which LES the system will use for MPDS
when the system is logged onto an I3 satellite. This list is typically
configured during installation.
The preferred GESs and LESs are typically configured during installation.
Entries in this list must be in the list of Known GES. For further
information see CONFIGURE on page 158.
Entries in this list must be in the list of Known LES. For further
information see CONFIGURE on page 158.
Entries in this list must be in the list of Known LES. For further
information see CONFIGURE on page 158.
To Next Page
