Chapter 5: System operation
MCDU operation 159
5555
• AUDIO 1 can be used to configure the audio of the cockpit headset, if
connected to the AVIATOR 700 system.
• MIC configures the volume of the microphone
• SPEAKER configures the volume of the speaker
• SIDETONE adjusts the sidetone percentage
• SILENCE enables (OFF) or suppresses (ON) ring tone
• COMF. NOISE configures the comfort noise
• AUDIO 2 can be used to configure the audio of the cockpit headset, if
connected to the AVIATOR 700 system. See AUDIO 1.
• SATELLITE allows configuration of the list of satellites and known
GESs and LESs.
KNOWN GES — This list is used from other parts of the user interface,
e.g. when making a manual logon (see MANUAL LOGON on page 154).
The list of preferred GES' is a subset of the list of known GES'.
KNOWN LES — This list contains the LESs for which the lists of
preferred LES' can be constructed.
INIT SAT — The first time the AVIATOR 700 system logs onto a
satellite it locates the satellite based on the information associated with
the satellites listed in this view.
• DISCLOSE POS indicates whether the position of the system is
disclosed to the GESs and LESs. This setting is typically configured
during the installation of the system. For further information see the
AVIATOR 700 Installation and Maintenance Manual.
• FAX configures the connection of fax to the POTS interfaces #5 and
#6. This setting can be used to prevent ringing on the POTS interfaces
during a broadcast call in case a fax has been connected. This setting is
These settings only affect the cockpit headsets when they are
used by the AVIATOR 700 system.
This list is typically created during installation.
This list is typically created during installation.
This table is created at the factory and typically should not be
modified.
To Next Page
