Chapter 3: Calls, faxes and SMS
Use a phone or fax machine (SDU) 35
3333
Example: If you always have a fax connected to the same Phone/Fax
interface you can set this interface to 3.1 kHz Audio only. This
will mean that if an incoming Standard Voice call is received,
this Phone/Fax interface will not ring. For details how to set up
the interfaces see the AVIATOR 700 Installation and
maintenance manual.
When connecting a G4 fax or a modem to the ISDN interface in the
AVIATOR 700 system you must use UDI.
To select the default outgoing call type (SDU)
This is typically set up during initial configuration of the system.
You can set the default outgoing call type in the Aero-SDU Configuration
Program. For further information, see the AVIATOR 700 Installation and
maintenance manual and the online help of the Aero-SDU Configuration
Program.
Primary and secondary call types can be configured in the
Aero-SDU Configuration Program. If all channels for the
primary call type are in use, the secondary call type will be
used.
To Next Page
Loading...
