ComAp IGS-NT Series User Manual

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf, ©ComAp – June 2013
301
 BTB close/open command is received via communication line or
 the input BTBButton is activated.
15.2.1.36 Binary output: MODES: Off mode
Related FW
3.0
Description
The output is closed while the controller is currently in OFF mode (either
switched by the mode selector on the front panel or by the input Remote
OFF).
15.2.1.37 Binary output: MODES: Man mode
Related FW
3.0
Description
The output is closed while the controller is currently in MAN mode (either
switched by the mode selector on the front panel or by the input Remote
MAN).
15.2.1.38 Binary output: MODES: Aut mode
Related FW
3.0
Description
The output is closed while the controller is currently in AUT mode (either
switched by the mode selector on the front panel or by the input Remote
AUT).
15.2.1.39 Binary output: MODES: Off mode
Related FW
3.0
Description
The output is closed while the controller is currently in OFF mode (either
switched by the mode selector on the front panel or by the input Remote
OFF).
15.2.1.40 Binary output: MODES: Man mode
Related FW
3.0
Description
The output is closed while the controller is currently in MAN mode (either
switched by the mode selector on the front panel or by the input Remote
MAN).

ComAp IGS-NT Series Specifications

General

Brand	ComAp
Model	IGS-NT Series
Category	Controller
Language	English