InteliLite Global Guide
130
How to set-up rental timer
This is a short guide for settings of rental timers. Please see following few steps how to set up rental timers:
Choose the type of rental timer
Rental Timer 1 (page 341) (based on engine running hours)
Rental Timer 2 (page 343) (based on date)
Adjust the length of chosen timer
Adjust the warning for user Rental Timer 1 Wrn (page 343) or Rental Timer 2 Wrn (page 345)(warning
will be displayed in alarmlist before elapsing of rental timer)
Adjust Rental Timer BOC (page 345) - common for both timers (if engine is still running after rental timer
counts down, this timer will starts count down and after elapse of timer the gen-set will be cooled down and
stop)
5.5.16 Service timers
Running hours counters
Service timers are used as maintenance interval counters. Counters can be set by setpoints - Maintenance
Timer 1 (page 235), Maintenance Timer 2 (page 236) and Maintenance Timer 3 (page 236). All of them
work the same way - their values are decremented every hour when the gen-set is running.
Actual value of counters is located either as the same setpoints Maintenance Timer 1 (page 235),
Maintenance Timer 2 (page 236) and Maintenance Timer 3 (page 236) or as values Maintenance 1 (page
495), Maintenance 2 (page 495) and Maintenance 3 (page 496).
When the value of counter reaches 0, the alarm Wrn Maintenance 1 (page 699) or Wrn Maintenance 2 (page
699) or Wrn Maintenance 3 (page 699) is active until the respective counter is readjusted back to nonzero
value.
Unused counter has to be adjusted to maximal value 10000 (Disabled).
5.5.17 Analog switches
There are logical analog function dedicated for analog switches. Each analog switch has setpoints for level ON
and level OFF and logical binary output.
Analog switch Setpoints Binary output
AIN SWITCH 01 (PAGE 660)
Analog Switch 1 On (page 267)
Analog Switch 1 Off (page 268)
AIN SWITCH01 (PAGE 582)
AIN SWITCH 02 (PAGE 660)
Analog Switch 2 On (page 270)
Analog Switch 2 Off (page 271)
AIN SWITCH02 (PAGE 583)
AIN SWITCH 03 (PAGE 660)
Analog Switch 3 On (page 273)
Analog Switch 3 Off (page 274)
AIN SWITCH03 (PAGE 583)
AIN SWITCH 04 (PAGE 661)
Analog Switch 4 On (page 276)
Analog Switch 4 Off (page 277)
AIN SWITCH04 (PAGE 584)
AIN SWITCH 05 (PAGE 661)
Analog Switch 5 On (page 279)
Analog Switch 5 Off (page 280)
AIN SWITCH05 (PAGE 584)
To Next Page
Loading...
