ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
131
Lamp name Active icon Inactive icon Notes
Amber warning lamp
Note: This value can light
or blink on both frequencies.
Red stop lamp
Note: This value can light
or blink on both frequencies.
Engine wait to start lamp
DPF/SCR lamp command
Note: DPF = Diesel
Particulate Filter; SCR =
Selective Catalytic
Reduction. This lamp also
activates alarm After-
Treatment (page 664).
Exhaust system high temperature
lamp command
Note: This lamp also
activates alarm After-
Treatment (page 664).
Malfunction indicator lamp
Note: This value can light
or blink on both frequencies.
This lamp also activates
alarm After-Treatment
(page 664).
Fluid tank low level indicator
Note: This lamp also
activates alarm After-
Treatment (page 664).
DPF regeneration inhibited
Note: Indicates the state of
diesel particulate filter
active regeneration
inhibition. This lamp also
activates alarm After-
Treatment (page 664).
Analog values
Supported analog values:

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65