CommScope ION-E Series - e-POI Subrack and Component Specifications

M0201AA ION
®
-E Series Hardware Installation Guide
© June 2017 CommScope, Inc. Page 35
Chapter Topics Page
Point Of Interface (e-POI) Subrack ......................................................................................................................................................................36
e-POI Subrack Back Panel Connectors............................................................................................................................................................ 36
Interface Card (IFC)......................................................................................................................................................................................... 37
e-POI Module..................................................................................................................................................................................................38
Installing an e-POI Subracks and Modules .......................................................................................................................................................... 39
Removing an e-POI Module from an e-POI Subrack............................................................................................................................................40
e-POI Subrack and Component Specifications ....................................................................................................................................................41
ThischapterprovidesaproductoverviewandinstallationinstructionsfortheION-ESeriesPointofInterface
(e-POI)Subracks.
UNRESOLVED: The current e-POI instruction sheet has 7/16 DIN connectors. We need to update the
instructions to the now0used 4.3-10 connectors. Request for information out to Dieter
Schiele, who is out of the office until 3July17.
UNRESOLVED: Also, not sure why the e-POI was not included in the ION-E Series Software Version 2.0.0
User’s Manual (PN M0201A0D), but I am adding it to this new ION-E HW install guide.
POINT OF INTERFACE (E-POI) SUBRACKS
4