CommScope ION-E Series - Document Revision History

ION
®
-E Series Hardware Installation Guide M0201AA
Page 2 © June 2017 CommScope, Inc.
Document Revision History
DOCUMENT REVISION HISTORY
Document # Document Date Technical Updates
M0201AAA June 2017
Initial release. Introduces the new Carrier Access Point, Low Power (CAPL), and replaces the
following ION-E Series user documentation:
• hardware section of the ION-E Series Software Version 2.0.0 User’s Manual (PN M0201A0D)
• ION-E Series Instructions for WCS Subracks (PN M0201A1C)
• ION-E Series Instructions for Ceiling Mount UAP (PN M0201A2A)
• ION-E Series Instructions for UAP Wall Mount (PN M0201A3B)
• ION-E Series Instructions for UAP (PN M0201A4A)
• ION-E Series Instructions for SUI, RFD, CAT, OPT, and AUT Cards (PN M0201A5B)
• ION-E Series Instructions for e-POI (PN M0201A7B)
• ION-E Series Instructions for UAP Quick Release Ceiling Mount (PN M0201A8A).