114 - 01 Speaker test failed 1. Verify speaker
connection.
2. Replace the speaker and
retest.
3. Replace the system
board and retest.
==============================================================================
Table 5-3. Memory Test Error Codes
==============================================================================
Error
Codes Error Description Recommended Action
------------------------------------------------------------------------------
201 - 01 Memory machine ID test failed The following steps apply
to error codes 201 - 01
201 - 02 Memory machine type test failed through 202 - 03:
201 - 03 Memory machine ID and type tests 1. Replace VDU controller
failed board and retest.
2. Replace the system ROM
202 - 01 Memory system ROM checksum failed and retest.
3. Replace the system
202 - 02 Failed RAM/ROM map test board and retest.
202 - 03 Failed RAM/ROM protect test
------------------------------------------------------------------------------
203 - 01 Memory write/read test failed The following steps apply
to error codes 203 -01
203 - 02 Error during saving program memory through 211 - 03:
write/read test
1. Replace the defective
203 - 03 Error during restore of program memory memory chip (or
in write/read test option memory if
installed, error
204 - 01 Memory address test failed code 208) if an error
code is accompanied
204 - 02 Error during saving program memory in by an XX000 BYYZZ
address test code and retest.
2. Replace the system
204 - 03 Error during restore of program memory memory board or the
in address test system board.
204 - 04 A20 address test failed
205 - 01 Walking I/O test failed
205 - 02 Error during saving program memory in
walking I/O test
205 - 03 Error during restore of program memory
in walking I/O test
205 - 04 Insufficient memory to perform test
------------------------------------------------------------------------------
Error
Codes Error Description Recommended Action
------------------------------------------------------------------------------
208 - 01 Memory refresh test failed The following steps apply