EasyManua.ls Logo

Compaq Portable II - 1.44 Megabyte Diskette Drive Specifications; Power Supply

Compaq Portable II
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tracks per Inch 96 (1.2 megabyte format)
48 (360 Kbyte format)
Number of Tracks 80 (1.2 megabyte format)
40 (360 Kbyte format)
Data Transfer Rate 500 Kb/s (1.2 megabyte format)
300 Kb/s (360 Kbyte format)
==============================================================================
Chapter 1.8 1.44 Megabyte Diskette Drive Specifications
Table 1-8. 1.44 Megabyte Diskette Drive Specifications
==============================================================================
Dimensions:
Height 0.90 in. (2.3 cm)
Depth 6.47 in. (16.42 cm)
Width 5.95 in. (11.1 cm)
Weight 1.98 lb (0.9 kg)
Media:
Tracks per Inch 135
Number of Tracks 80
Data Transfer Rate 500 Kb/s (high density)
250 Kb/s (low density)
==============================================================================
Chapter 1.9 Power Supply
Table 1-9. Power Supply Specifications
==============================================================================
Input Requirements:
Line Voltage 102 to 132 VAC. single phase
180 to 264 VAC. single phase
3.0A fuse, 125 VAC for 120 VAC operations
2.5A fuse, 150 VAC for 220/240 VAC operation
Line Frequency 47 - 62 Hz
Cooling Forced air provided by internal 12 VDC fan
------------------------------------------------------------------------------
Volts Direct Current Output
Nominal Maximum
Nominal Current Continuous Peak Regulation
Voltage Amperes Current Current Tolerance
(VDC) Minimum (Amperes) Maximum * (Amperes) Percentage
------------------------------------------------------------------------------
+5.0 3.0 13.9 13.9 ñ2
-5.0 0.0 0.5 0.5 ñ5
+12.2 1.0 4.0 7.0 ñ2
-12.0 0.0 0.5 0.5 ñ5
------------------------------------------------------------------------------
* These values are maximum values based on nominal operating conditions for
temperature, line voltage, frequency and altitude. Also, a minimum load on
l2 VDC must be maintained for proper power supply operation.
==============================================================================

Table of Contents

Related product manuals