CPS ES Series - Opening the Cabinets

52
5.2 Opening the Cabinets
The following sections cover how to wire the power cables, communication cables, and other electrical connections within the
ESS. External wiring can be installed after opening the left front door of battery cabinet and the front door of PCS cabinet.
1. Unlock the left door of the battery cabinet with a key and pull it 45 degrees outward to open.
2. Unlock the right door of the battery cabinet with a key and pull it 45 degrees outward to open.
3. Unlock the front door of the PCS cabinet with a key and pull it 45 degrees outward to open.
4. Unlock the rear door of the PCS cabinet with a key and pull it 45 degrees outward to open the rear door.
Figure 5-1 Opening the ESS Cabinets (Left: Battery Cabinet, Right: PCS Cabinet)