138 • 4-Series™ Control Systems Product Manual — Doc. 8559B
Update User Dialog Box
The following Update User settings may be viewed or configured:
l
Name: The chosen username
l
Active Directory User: Turn on the toggle to use authentication via Active Directory for the
selected user.
l
Password: Enter a new password for the selected user.
l
Confirm Password: Reenter the password provided in the Password field.
l
Groups: Add the user to one or more groups. For more information, refer to Groups (on
page140).
NOTE: A user must be added to an Active Directory group to be selected as an Active
Directory user.
Select OK to save any changes and to return to the Users selections. Select Cancel to cancel any
changes.
Delete User
Select the trashcan icon in the Actions column to delete the user.
A pop-up dialog box is displayed asking whether the user should be deleted. Select Yes to delete
the user or No to cancel.
Create User
Select Create User at the bottom of the page to create a new control system user. The Create
User dialog box is displayed.
To Next Page
Loading...
