Product Manual — Doc. 8559B 4-Series™ Control Systems • 137
NOTE: A user must be added to an Active Directory group before the user may be
selected as an active directory user. For more information, refer to Groups (on
page140).
If the control system users span multiple pages, use the navigation arrows on the bottom of the
page to move forward or backward through the pages, or select a page number to navigate to
that page. Additionally, the number of users displayed on each page may be set to 5, 10, or 20
users.
An Actions column is also provided for each user that allows various actions to be performed.
The following selections may be selected from the Actions column.
User Details
Select the information button in the Actions column to view information for the selected user.
The User Details pop-up dialog box is displayed.
User Details Dialog Box
The following settings are displayed for the current user:
l
Name: The chosen username
l
Active Directory User: Reports whether the user is (Yes) or is not (No) authenticated
through Active Directory
l
Groups: Lists any groups that contain the user
Select OK to return to the Authentication Management > Users page.
Update User
Select the editing button in the Actions column to edit settings for the selected user. The
Update User dialog box is displayed.
To Next Page
Loading...
