Page 52
Contact ID Code Summary
In addition to the programmable Contact ID code assignments defined at Addresses 321-331, there are a number of
event codes with extensions pre-defined as listed below. This extensions list is for your reference only and can not be
re-assigned.
Event Code Extension Comment
Cabinet Tamper 137 000 Panel & Sat Tamper etc
Zone Tamper - Low (short circuit) 137 001 to 004 Zone Input 1-4
Zone Tamper - High (open circuit) 137 005 to 008 Zone Input 1-4
Keypad Panic (or 1&3) 120
Keypad Fire (4&6) 110
Keypad Medical (7&9) 100
Arm by "ARM” key (Quick Arm) 408 000
Arm by user code 401 001 User #1
through to 010 user #10
Arm by Remote Control Button 407 001 Button 1 (User #1)
through to 008 Button 8 (User #8)
Arm by Telephone Control (remote set) 401 090 Telephone Control user
Arm by Keyswitch 409 001 Area “A” Keyswitch Arm/Disarm
409 002 Area “B” Keyswitch Arm/Disarm
Arm by Up/Download 401 99 Remote User Number
Remote Control Panic 120 001 Remote Control Button #1
008 Remote Control Button #8
Wireless PIR / Reed Switch Activation 130 001 Zone 1
through to 008 Zone 8
System Battery Low 302 000 Control Panel Battery low
Mains Fail 301 000 230v mains to control panel lost
Wireless PIR / Reed Switch Battery Low 384 001 Zone 1
through to 008 Zone 8
Wireless PIR Supervised Alarm 381 001 Zone 1
through to 008 Zone 8
Zone Inactivity Alarm 391 001 Zone 1
through to 008 Zone 8
Remote Control Battery Low 384 021 R/C Button #1
022 R/C Button #2
023 R/C Button #3
through to 028 R/C Button #8
TEST Calls 602 000 24 hour test
Zone Bypasses 570 001 Bypass Zone 1
through to 008 Bypass Zone 8
Phone Line Failure 351 000 Reported when line is restored
Stay Mode (part set) 441 000 Arm by “Stay” Button
001 User 1
through to 010 User 10
Duress Alarm 121 001 Duress at Keypad #1
through to 008 Duress at keypad #8
To Next Page
Loading...
