EasyManua.ls Logo

Cuisinart ICE48E - Electrical Safety

Cuisinart ICE48E
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
wet hands.
Do not use the appliance if the supply cord is damaged. In the
event of supply cord damage, discontinue use immediately.
If the supply cord is damaged, it must be replaced by the
manufacturer. Return the appliance to the Customer Care
Centre (see “International guarantee” on page 94). No repair
must be attempted by the consumer.
Do not wrap the supply cord around the main body of the
appliance during or after use.
Do not leave the supply cord hanging over the edge of a
kitchen table or worktop.
Do not allow the supply cord to come into contact with
sources of heat.
This appliance is intended for domestic use only and is not
intended to be used in applications such as: staff kitchen
areas in shops, offices, and other working environments; farm
houses; by customers in hotels, motels, and other residential
type environments; bed and breakfast type establishments.
ELECTRICAL SAFETY
Always ensure the voltage to be used corresponds with the
voltage on the appliance, this is indicated on the bottom of
the housing.
The appliance is not intended to be operated by means of an
external timer or separate remove control system.
Always disconnect the appliance from the electric supply, if
it is left unattended and before assembling, disassembling or
cleaning.
Never pull the plug out of the mains socket by the supply
cord.
Always ensure that your hands are dry before touching the
supply cord or removing the plug from the mains socket.

Table of Contents

Related product manuals