D-Link DXS-3400 SERIES - Page 467

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
457
Log Description Severity
Parameters description:
InstanceID: Instance ID.
startvlanid- endvlanid: VLANlist
Event description: Spanning Tree MST configuration ID VLAN mapping table added.
Log Message: Spanning Tree MST configuration ID VLAN mapping table changed
(instance: <InstanceID> add vlan <startvlanid> [- <endvlanid>]).
Parameters description:
InstanceID: Instance ID.
startvlanid- endvlanid: VLANlist
Informational
Peripheral
Log Description Severity
Event description: Fan Recovered .
Log Message: Unit <id>, Fan <id> recovered
Parameters description:
Unit <id>: The unit ID.
Fan <id>: The FAN ID.
Critical
Event description: Fan Fail
Log Message: Unit <id>, Fan <id> failed.
Parameters description:
Unit <id>: The unit ID.
Fan <id>: The FAN ID.
Critical
Event description: Temperature sensor enters alarm state.
Log Message: [Unit <unitID>] Temperature sensor <sensorID> enters alarm state (current
temperature: <temperature>)
Parameters description:
unitID: The unit ID.
sensorID: The sensor ID.
temperature: The temperature.
Warning
Event description: Temperature recovers to normal.
Log Message: [Unit <unitID>] Temperature sensor <sensorID> recovers to normal state
(current temperature: <temperature>)
Parameters description:
unitID: The unit ID.
sensorID: The sensor ID.
temperature: The temperature.
Informational
Event description: Power failed.
Log Message: Unit <id>, Power <id> failed
Parameters description:
Unit <id>: The unit ID.
Power <id>: The Power ID..
Critical
Event description: Power is recovered.
Log Message: Unit <id>, Power <id> is recovered
Parameters description:
Unit <id>: The unit ID.
Power <id>: The Power ID.
Critical
Event description: External Alarm state to change. Critical