DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
459
Log Description Severity
enters normal mode, and the syslog will be recorded.
Log Message: Unit <unit-id>, Safeguard Engine enters NORMAL mode.
Parameters description:
unit-id: Unit ID.
SNMP
Log Description Severity
Event Description: SNMP request received with invalid community string
Log Message: SNMP request received from <ipaddr> with invalid community string.
Parameters Description:
ipaddr: The IP address.
Informational
SRM
Log Description Severity
Event description: When stacking succeed and the master detects some slave has
different SRM mode.
Log Message: Unit <unitID> SRM mode is different with master.
Parameters description:
unitID: the Unit ID of device in the stacking system.
Alert
SSH
Log Description Severity
Event description: SSH server is enabled.
Log Message: SSH server is enabled
Informational
Event description: SSH server is disabled.
Log Message: SSH server is disabled
Informational
Event description: Login failed through SSH.
Log Message: Login failed through SSH (Username: <username>, IP: <ipaddr |
ipv6address>).
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
ipv6addr: Represent client IPv6 address.
Critical
Stacking
Log Description Severity
Event description: Hot insertion.
Log Message: Unit: <unitID>, MAC: <macaddr> Hot insertion.
Parameters description:
unitID: Box ID.
Macaddr: MAC address.
Informational
Event description: Hot removal. Informational
To Next Page
Loading...
