2-3
INSPECTIONS / ADJUSTMENTS
MAINTENANCE SCHEDULE
● Carry out pre-operation check at each scheduled maintenance period based on the information described in the owner’s
manual.
I : INSPECT AND CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY.
R : REPLACE L : LUBRICATE C : CLEAN
＊ If there are no appropriate type of tools and maintenance data available, or if you do not have mechanical technology
contact authorized maintenance shops, dealers or other designated repair shops for maintenance and inspections.
To ensure safety, inspections and maintenance of these parts must be carried out by authorized maintenance shops,
dealers or other designated repair shops.
NOTE
1. After the odometer reading exceeds 12,000km, repeat maintenance service at intervals indicated in the table.
2. After riding in areas with high humidity or pollution, carry out maintenance service more frequently.
3. Replace every 2 years. Proper technology is required for this job.
＊
＊
＊
＊
＊
＊
ENGINE OIL
ENGINE OIL FILTER SCREEN
FUEL FILTER
GEAR OIL
VALVE CLEARANCE
CARB. IDLE
AIR CLEARER
SPARK PLUG
BRAKE SYSTEM
DRIVE BELT
SUSPENSION
NUTS, BOLTS, FASTENERS
TIRE
STEERING HEAD BEARING
BRAKE FLUID
RADIATOR COOLANT
RADIATOR CORE
RADIATOR CAP
BRAKE LEVER
BRAKE PAD WEAR
R
(Brand new)
RRRR
300Km
IIII
RRRRR
R
(Brand new)
RR
300Km
IIII
IIII
IIIII
IIIII
IIIII
IIII
IIII
IIIII
III
IIIII
IIRIR
IIIII
IIII
IIII
IIIII
IIII
Daily check priorto driving
FREQUENCY
ODOMETER READING(NOTE 1)
REMARK
ITEM
1,000Km
1MONTH
4,000Km
6MONTH
8,000Km
12MONTH
12,000Km
18MONTH
16,000Km
24MONTH
To Next Page
Loading...
Need help?
General
