2-11
INSPECTIONS / ADJUSTMENTS
WHEELS/TIRES
STANDARD PRESSURE
•Check the tire pressure when the tires have been
cooled off. Check the tread (the part making contact
with the road surface) and side for wear, cracks or
damage. Replace damaged tires.
● Check the tread depth at the tire center.
● If the tread depth has reached the service limit, replace
the tire.
SERVICE LIMIT :0.5mm
BOLTS, NUTS, FASTENERS
● Check all nuts and bolts of the frame during the regular
maintenance to check if they meet the prescribed
torque value.
● Check all pins, clips, hose clamps and cable stays.
FRONT WHEEL
2.00(200)
2.00(200)
REAR WHEEL
2.00(200)
2.25(225)
ITEM
DRIVER ONLY
DRIVER AND A PASSENGER
㎏f/㎠ (kpa)
STEERING HEAD BEARING
● Lift the front wheel and check if the handle moves right
and left smoothly. If the handles move heavily, check if
the cable or electric cord interferes with the handle. If
the hadle moves satisfactorily, adjust the steering head
bearing.
•Check the cable if it interferes with the handle
operation.
To Next Page
Loading...
Need help?
General
