95XF series Inspection and adjustment
EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
3-55
5. The specified wheel-bearing play is
achieved by turning the adjusting nut (1)
counter-clockwise between 45 ° and 60°
(distance A - B in the drawing) using the
adjusting spanner (A). The precise angle
should be such that the circlip (2) can be
fitted. If necessary, turn the circlip around,
changing the hole pattern.
1
A
S7 00 085
6. Fit the c irclip (2) so that the circlip lip falls
into the key groove of the axle journal and
the dowel of the adjusting nut (1) falls into
one of the holes of the circlip (2).
2
1
S7 00 086
5
200424
To Next Page
Loading...
