User's Manual
141
Figure 6-111 Live
Point to the features panel, and the operation icons are displayed.
●
Click to add license plate information to the plate database. For details, see "6.8.3.2.3 Adding
from Detection Results".
●
Click or double-click the vehicle image to play back the video image (10 s before and after
the snapshot).
6.7.3.3 Detection Statistics
On the LIVE page, select a view and then click . The VEHICLE TOTAL page is displayed.
Click , and then select Vehicle Detection. The information of detected vehicles is displayed.
Figure 6-112 Vehicle detection
●
Point to the information panel, and then click to add license plate information to plate
database. For details, see "6.8.3.2.3 Adding from Detection Results".
●
Point to the information panel, and then click or double-click the picture to play back the
video image (10 s before and after the snapshot).
●
Point to the information panel, and then click to export the video and picture to specified
saving path.
Make sure that USB storage device is connected during local operation.