User's Manual
253
Voice Prompt
When there is an alarm,
system can play the selected
audio file.
Audio function has been
configured. See "7.3.5 Voice
Management" for detailed
information.
Smart Tracking
Alarm is triggered when a
tripwire or intrusion behavior
is detected. If smart tracking
action is configured, the PTZ
camera automatically rotates
to the target view to track it.
See "7.1.1.3.6 Smart Tracking".
Report Alarm
When an alarm occurs, the
system reports the alarm to
alarm center.
Alarm center has been
enabled. For details, see
"8.3.2.8 Alarm Center".
Audio and Light Alarm
When an alarm occurs, the
system associates with the
remote device to perform
audio and light actions.
The camera that supports this
function has been connected.
For details, see "8.4.1.13 Audio
and Light Alarm".
8.4.1.1 Record
Enable record control function. The system links the selected remote device to record when there is
corresponding alarm event.
Make sure that the remote device, such as IPC, has been added. See "5.4.2 Adding Remote Device"
for detailed information.
Step 1 Click
Actions, and then select Record.
Figure 8-37 Record
Step 2 Set the time length of recording after the event moment.
Step 3 (Optional) Repeat Step 1–Step 2 to link multiple remote devices to record.
8.4.1.2 Buzzer
The system activates a buzzer alarm when there is corresponding alarm event.
Click
Actions and select Buzzer to enable this function.
Figure 8-38 Buzzer
To Next Page
Loading...
Need help?
General
