User's Manual
240
HTTP Port
Set according to the actual requirements. The default value is 80. The
value ranges from 1 to 65535.
If the value you set is not 80, please add the port number after the IP
address when you are using browser to login the device.
HTTPS Port
Set according to the actual requirements. The default value is 443. The
value ranges from 1 to 65535.
UDP Port
Set according to the actual requirements. The default value is 37778.
The value ranges from 1025 to 65535.
Step 3 Click Save.
System reboots corresponding service of the port.
8.3.2 Network Apps
Set device network parameters, so that system can connect to other devices.
8.3.2.1 P2P
P2P is a peer to peer technology. You can scan the QR code to download cellphone APP without
DDNS service or the port mapping or installing the transmission server. After register the device to
the APP, you can view the remote video, playback record file and so on.
●
Make sure that the system has connected to the network. Otherwise, the P2P function is null.
●
When using the P2P function, we will collect device information such as IP address, MAC address,
name and serial number. The collected information is only used for remote access.
Step 1 Click , or click on the configuration page, and then select
NETWORK > Network
Apps > P2P.