User's Manual
221
8.2.2 Remote Device
The Device supports to add remote device, modify its IP address and configurations, and export its
information.
8.2.2.1 Viewing Remote Devices
View connected remote devices. For details about adding devices, see "8.2.2.3 Configuring Remote
Devices".
Step 1 Click , or click on the configuration page, and then select
DEVICE.
Step 2 Select the root node in the resource tree, and then click the Device List
tab.
Figure 8-4 Device list
Step 3 View details of connected devices, including IP address and serial number.
●
In the
Status column, indicates that the device is offline.
●
In the
Status column, indicates that the device is online.
●
In the Status column, indicates that the device is in exception. Point to , and
then you are prompted about the details of the exception, such as being uninitialized,
device mismatch, and wrong password.
Step 4 (Optional) Click to set filtering conditions for search.
8.2.2.2 Changing IP Address
Modify IP address of the remote device connected or not connected to the Device.
To Next Page
Loading...
Need help?
General
