User's Manual
261
Figure 8-51 Offline alarm
Step 4 Click to enable device offline alarm.
Step 5 Click Deployment Time to select schedule from the drop-down list.
After setting deployment period, system triggers corresponding operations when there is
a motion detection alarm in the specified period.
●
Click
View Schedule to view detailed schedule settings.
●
If the schedule is not added or the added schedule does not meet actual needs, click
Add Schedule. See "8.8.4 Schedule" for detailed information.
Step 6 Click
Actions to set alarm actions. See "8.4.1 Alarm Actions"for detailed information.
Step 7 Click Save.
8.4.2.4 Configuring AI Application
Configure AI detection result display strategy of the Device. If you have not set AI display settings for
current remote device, the remote device inherits AI display mode of the Device.
8.4.2.4.1 Viewing AI Plan
After adding remote device, on IVSS, obtain AI detection type and status of the remote device.
On the EVENT page, select the root node in the device tree on the left. Select AI Application > AI
Plan > AI Plan .
After installing the AI module, and the remote device supports AI detection, and you have enabled
the AI detection function, you can view channel name of the remote device on the corresponding AI
detection panel.
indicates that AI by camera is enabled; indicates that AI by device is enabled.
To Next Page
Loading...
Need help?
General
