User's Manual
60
Step 5 Set detection area on the video (yellow area).
Figure 6-4 Area
●
Click or white dot on detect region frame, and drag to adjust its range.
●
Click or to set the minimum size or maximum size of the face detection area.
System triggers an alarm once the size of detected target is between the maximum size
and the minimum size.
Step 6 Click
Deployment Time to select a schedule from the drop-down list.
System triggers corresponding alarm actions only during the alarm deployment period.
You can select an existing schedule from the Deployment Time drop-down list. You can
also add a new schedule. For details, see "8.8.4 Schedule".
Step 7 Click Action to set alarm action. See "8.4.1 Alarm Actions" for detailed information.
Step 8 Click Save.
6.2.3 Live View of Face Detection
You can view real-time face detection images and video.
6.2.3.1 Setting AI Display
You can configure display rule of face detection results.
Before using this function, ensure that view has been created. See "7.1.1 View Management" for
detailed information.
Step 1 On the LIVE page, click and select the Face tab.
To Next Page
Loading...
Need help?
General
