Local Configurations 96
Click to go to the live view screen.
When you point to , the current user account is displayed.
Click , select Logout, Reboot, or Shutdown according to your
actual situation.
Displays Cell Phone Client and Device SN QR Code.
Cell Phone Client: Use your mobile phone to scan the QR code to
add the device into the Cell Phone Client, and then you can start
accessing the Device from your cell phone.
Device SN: Obtain the Device SN by scanning the QR code. Go to
the P2P management platform and add the Device SN into the
platform. Then you can access and manage the device in the WAN.
For details, refer to the P2P operation manual. You can also
configure P2P function in the local configurations. See "5.1.4.5
Configuring P2P Settings."
Table 5-19
5.4 Controlling PTZ Cameras
PTZ is a mechanical platform that carries a camera and a protective cover and performs overall
control remotely. A PTZ can move in both horizontal and vertical direction to provide all-around
view to the camera.
Before operating PTZ, ensure the network connection between PTZ and the Device.
5.4.1 Configuring PTZ Connection Settings
You need to configure the PTZ connection settings before use.
Local connection: RS-485 Port for connecting Speed Dome or coaxial cable for connecting
coaxial camera.
Remote connection: local area network.
Select Main Menu > CAMERA > PTZ. Step 1
The PTZ interface is displayed. See Figure 5-56.
To Next Page
Loading...
Need help?
General
