Name: Dahua DH-XVR1B08
Brand: Dahua
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Local Configurations 57

5.1.3.3 Using Reset Button on the Mainboard

You can always use the reset button on the mainboard to reset the Device to the factory default.

Not all models are provided with reset button.

Disconnect the Device from power source, and then remove the cover panel. For Step 1

details about removing the cover panel, see "2.2 Installing HDD."

Find the reset button on the mainboard, and then press and hold the reset button for 5 Step 2

seconds to 10 seconds. See Figure 5-17 for the location of the reset button.

Figure 5-17

Reboot the Device. Step 3

After the Device is rebooted, the settings have been restored to the factory default. You

can start resetting the password.

5.1.4 Setting Up with the Startup Wizard

5.1.4.1 Entering Startup Wizard

The Startup Wizard helps you configure the basic settings to set up the Device.

After you have initialized the Device, the Startup Wizard interface is displayed. See Figure

5-18.

Dahua DH-XVR1B08 Specifications

General

Dahua DH-XVR1B08 User Manual

Questions and Answers: