EasyManuals Logo

Dahua DH-XVR1B08 User Manual

Dahua DH-XVR1B08
359 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #288 background imageLoading...
Page #288 background image
Local Configurations 272
5.18.4 Configuring Record
Record type includes auto and manual record. You can configure record type of main stream
and sub stream. See "5.7 Configuring Record Settings".
5.18.5 Configuring Advance Settings
Create HDD group, and save main stream, sub stream and snapshot of designated channels to
the HDD group.
If the interface displays that "Current HDD Mode is Quota Group", click "Change to HDD
Group Mode", and then configure HDD group.
You can enable either HDD Group Mode or Quota Group. The system prompts to reboot
the device each time when you switch the mode.
Select Main Menu > STORAGE > ADVANCE > HDD. Step 1
The HDD interface is displayed. See Figure 5-239.
Figure 5-239
Select group for each HDD, and then click Apply to complete the settings. Step 2
After configuring HDD group, click Main Stream, Sub Stream and Snapshot tabs Step 3
respectively, to configure the saving of main stream, sub stream and snapshot
information of different channels to different HDD groups. See Figure 5-240, Figure
5-241 and Figure 5-242.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dahua DH-XVR1B08 and is the answer not in the manual?

Dahua DH-XVR1B08 Specifications

General IconGeneral
Audio Input1 channel, RCA
Audio Output1 channel, RCA
Video Output1 HDMI, 1 VGA
USB2 USB 2.0 ports
Power SupplyDC12V/1.5A
Video CompressionH.265/H.264
Analog Camera Input8 channels, BNC
IP Camera Input8
HDD1 SATA port, up to 6TB
Network1 RJ-45 port (10/100 Mbps)
Operating Temperature-10°C to +55°C
Operating Humidity10% to 90%
Max Recording Resolution1080N/720p/960H/D1/CIF

Related product manuals