Dahua DH-XVR1B08 User Manual

Local Configurations 229
5.13.2 Configuring POS Settings
Select Main Menu > POS > POS SETUP. Step 1
The POS SETUP interface is displayed. See Figure 5-194.
Figure 5-194
Configure the settings for the POS parameters. See Table 5-57. Step 2
Parameter
Description
POS Name
In the POS Name list, select the POS machine that you want to
configures settings for. Click to modify the POS name.
The POS name supports 21 Chinese characters or 63 English
characters.
Enable
Enable the POS function.
Record CH
Select the channel(s) that you want to record. The selected
channel(s) starts recording after an alarm occurs.
The recording for POS alarms and auto recording function must
be enabled. For details, see "5.1.4.9 Configuring Recorded Video
Storage Schedule" and "5.9.1 Enabling Record Control."
Privacy Setup
Enter the privacy content.
Protocol Type
Select POS by default. Different machine corresponds to different
protocol.

Dahua DH-XVR1B08 Specifications

General

Audio Input	1 channel, RCA
Audio Output	1 channel, RCA
Video Output	1 HDMI, 1 VGA
USB	2 USB 2.0 ports
Power Supply	DC12V/1.5A
Video Compression	H.265/H.264
Analog Camera Input	8 channels, BNC
IP Camera Input	8
HDD	1 SATA port, up to 6TB
Network	1 RJ-45 port (10/100 Mbps)
Operating Temperature	-10°C to +55°C
Operating Humidity	10% to 90%
Max Recording Resolution	1080N/720p/960H/D1/CIF