Local Configurations 71
After you have configured the encode settings, on the SNAPSHOT interface, click Step 1
Next.
The BASIC interface is displayed. See Figure 5-30.
Figure 5-30
Configure the basic storage settings parameters. See Table 5-8. Step 2
Configure the settings for the situation when all the read/write discs
are full, and there are no more free discs.
Select Stop Record to stop recording
Select Overwrite to overwrite the recorded video files always
from the earliest time.
The locked recorded video files will not be overwritten.
Configure the time length and file length for each recorded video.
Configure whether to delete the old files and if yes, in the Auto-Delete
Old Files list, select Customized to configure the time length for how
long you want to keep the old files.
Table 5-8
5.1.4.9 Configuring Recorded Video Storage Schedule
You can configure the schedule for the recorded video such as channels to record, alarm
settings, and the armed period.
You can also configure recorded video storage settings by selecting Main Menu > STORAGE >
SCHEDULE > Record.
After you have configured the basic storage settings, on the BASIC interface, click Step 1
Next.
The Record interface is displayed. See Figure 5-31.
To Next Page
Loading...
Need help?
General
