Local Configurations 81
Click to cancel the bidirectional talk. The bidirectional talk of other digital channels is
resumed.
5.2.2.9 Remote Devices (Digital channel only)
You can view the information of remote devices and add new remote devices to replace the
current connected devices.
By clicking , the Camera Registration interface is displayed. For details about adding the
remote devices, see "5.6 Configuring Remote Devices."
5.2.3 Navigation Bar
You can access the functions to perform operations through the function icons on the
navigation bar. For example, you can access Main Menu and switch window split mode. See
Figure 5-41.
The navigation bar is disabled by default. It does not appear in the live view screen until it is
enabled. To enable it, select Main Menu > SYSTEM > GENERAL, enable the Navigation Bar,
and then click Apply.
Figure 5-41
Expand or condense the navigation bar.
Go to the previous screen.
Enable tour function. The icon switches to .
Open the PTZ control panel. For details, see "5.4 Controlling PTZ
Cameras."
Open the Color Setting interface. For details, see "5.2.5 Color
Setting."
This function is supported only in single-channel layout.
To Next Page
Loading...
Need help?
General
