Dahua DH-XVR1B08 User Manual

Local Configurations 112
Click Copy to copy the settings to other channels.
5.5.2.3 Encode Enhancement
 Only some series products support encode enhancement.
 Enabling or disabling this function will take effect after the device is rebooted.
This function is disabled by default. After it is enabled, when main stream resolution is 4K, the
frame rate can be 10 fps.
Select Main Menu > CAMERA > ENCODE > Encode Enhancement. Step 1
The Encode Enhancement interface is displayed. See Figure 5-71.
Figure 5-71
Click behind Encode Enhancement, to enable this function.
Step 2
5.5.3 Configuring Overlay Settings
You can configure to display system time and channel name on each channel window in the live
view screen.
Select Main Menu > CAMERA > OVERLAY > Overlay. Step 1
The Overlay interface is displayed. See Figure 5-72.

Dahua DH-XVR1B08 Specifications

General

Audio Input	1 channel, RCA
Audio Output	1 channel, RCA
Video Output	1 HDMI, 1 VGA
USB	2 USB 2.0 ports
Power Supply	DC12V/1.5A
Video Compression	H.265/H.264
Analog Camera Input	8 channels, BNC
IP Camera Input	8
HDD	1 SATA port, up to 6TB
Network	1 RJ-45 port (10/100 Mbps)
Operating Temperature	-10°C to +55°C
Operating Humidity	10% to 90%
Max Recording Resolution	1080N/720p/960H/D1/CIF