HDD Capacity Calculation 324
HDD Capacity Calculation Appendix 2
Calculate total capacity needed by each DVR according to video recording (video recording
type and video file storage time).
According to Formula (1) to calculate storage capacity
that is the capacity of each Step 1
channel needed for each hour, unit MB.
Formula (1):
In the formula:
means the bit rate, unit Kbit/s
After video time requirement is confirmed, according to Formula (2) to calculate the Step 2
storage capacity
, which is storage of each channel needed unit MB.
Formula (2): = ×
×
In the formula:
means the recording time for each day (hour)
means number of days for which the video shall be kept
According to Formula (3) to calculate total capacity (accumulation)
that is needed Step 3
for all channels in the DVR during scheduled video recording.
Formula (3):
In the formula:
means total number of channels in one DVR
According to Formula (4) to calculate total capacity (accumulation) that is needed Step 4
for all channels in DVR during alarm video recording (including motion detection).
Formula (4):
×a%
In the formula：a% means alarm occurrence rate
You can refer to the following table for the file size in one hour per channel. (All the data listed
below are for reference only.)
To Next Page
Loading...
Need help?
General
