Local Basic Operation 96
Add the device by manually configuring settings such as IP address,
channel selection.
Displays the added devices. You can edit and delete the device, and
view the device information.
Select the check box of the added device, and then click Delete to
delete the added device.
Select the searched devices and then click Import to import the
devices in batches.
Select the added devices and then click Export. The exported
devices information is saved into the USB storage device.
Manual Add
1) Click Manual Add.
The Manual Add interface is displayed. See Figure 4-29.
Figure 4-29
2) Configure parameters. See Table 4-8.
Table 4-8
In the Channel list, select the channel that you want use on the
Device to connect the remote device.
In the Manufacturer list, select the manufacturer of the remote
device.
In the IP Address box, enter the IP address of remote device.
To Next Page
Loading...
