Local Basic Operation 250
Figure 4-182
Step 2 Configure the settings for the POS parameters. See Table 4-50.
Table 4-50
In the POS Name list, select the POS machine that you want to
configures settings for. Click to modify the POS name.
The POS name shall be unique.
The POS name supports 21 Chinese characters or 63
English characters.
Click to select a channel to record.
Enter the privacy contents. Refer to "4.9.2.1 Privacy Setup".
Select POS by default. Different machine corresponds to different
protocol.
To Next Page
Loading...
Need help?
General
