Local Basic Operation 309
Step 1 Select Main Menu > ACCOUNT > User, click of the corresponding user.
The Modify User interface is displayed. See Figure 4-240.
Figure 4-240
Step 2 Check the box to enable Modify Password function. Enter old password and then enter
new password twice.
Password/confirm password: The password ranges from 8 to 32 digitals. It can
contain letters, numbers and special characters (excluding “'”,“"”,“;”,“:”,“&”) . The
password shall contain at least two categories. Usually we recommend the strong
password.
For the user of account authority, it can modify the password of other user.
STRONG PASSWORD RECOMMENDED-For your device own safety, create a
strong password of your own choosing. We also recommend you change your
password periodically especially in the high security system.
Check the box to enable Unlock Pattern function, click .
Step 3 Enter the Unlock Pattern interface to set. See Figure 4-241.
To Next Page
Loading...
Need help?
General
