ESS Series User’s Manual
All update steps of the disk array enclosure are on the WEB interface of the host. Please use a
SAS cable to connect the disk array enclosure to the host.
a) Open the browser and input the IP address of the host. Click Enter button, you can see
system login interface. See Figure 5-20. Input administrator user name and password.
Default user name is admin and password is 888888888888.
Figure 5-20
b) From System->Upgrade interface, and then select disk array enclosure type from the
dropdown list. See Figure 5-21.
Figure 5-21
c) Click Browse button; select the applications you want to update. Please save the update
applications on the PC before the update begins.
d) You can see system pops up a dialogue box for you to confirm update operation.
Please click OK to continue. See Figure 5-22.
To Next Page
Loading...