ESS Series User’s Manual
2).In Figure 8-8, click disk 2 and then click initialize disk. See Figure 8-9.
Figure 8-9
3). Right-click “12.00GB unallocated” and then select new partition. See Figure 8-10.
Figure 8-10
4). Please follow the instructions to set and format the disk.
5). After formatting, the iSCSI share will be displayed as newly added volume and has its own
driver number. See Figure 8-11. Now you can use iSCSI device.
Please note Disk2 is the newly added iSCSI device.
To Next Page
Loading...