ESS Series User’s Manual
Figure 3-34
3.5.1.1 Add thin pool
Click Add button, system goes to the following interface. See Figure 3-35.
Figure 3-35
3.5.1.2 Delete thin pool
There are two situations:
If there is no thin LV on the thin pool, you can just click remove button to delete.
If there is thin LV on the thin pool, please delete the thin LV first and then click remove
button. Otherwise, system pops up a dialogue box saying the thin pool is in use now.
3.5.1.3 Extend thin pool
Click , and then click extend button, you can extend the thin pool space. See Figure 3-36.
To Next Page
Loading...