ESS Series User’s Manual
The rear panel has two types: single power and redundancy power. These two types have slight
difference on the power module and fan module. Please check carefully.
The single power mode rear panel is shown as below. See Figure 5-10.
Figure 5-10
The redundancy power series rear panel is shown as in Figure 5-11.
Figure 5-11
You can refer to the following sheet for detailed information of the rear panel.
It is for case ventilation.
Connect to AC power supplying source.
It is about all kinds of ports and indictor light
introduction. Please refer to the following sheet.
You can refer to the following sheet for detailed information of main control module.
To Next Page
Loading...