User's Manual
94
5 Local Operations
The following figures are for reference only. Slight difference might be found on the actual interface.
5.1 Initialization
●
For first-time use, set a login password for the admin account (default user).
●
We recommend setting password protection so that you can reset password in case you forgot.
●
For your device safety, keep your login password well, and change the password regularly.
●
The IP address of the Device is 192.168.1.108 by default.
Procedure
Step 1 Start the NVR.
Step 2 Set region, time zone, and time according to the actual situation, and then click
Next
.
Click to shut down the device. The system integrator or the user can shut down the
Device directly after setting the time zone.
Step 3 Set the login password for the admin account and then click
Next
.
Figure 5-1 Set password
Table 5-1 Password parameters
Parameter Description
User By default, the user is admin.
Password
Enter the password for admin and then confirm the password.
Confirm Password
To Next Page
Loading...
Need help?
General
