Dahua JRC-27F

User's Manual
210
Figure 5-125 Schedule and alarm linkage
1) Click .
2) Click
Setting
next to
Schedule
to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
On the time line, drag to set the period.
●
You can also click to set the period.
3) Configure alarm linkage. For details, see Table 5-43.
4) Click
Apply
.
Step 7 Select
Enable
checkbox and then click
Apply
.
5.9.6.2.7 Missing Object Detection
The system generates an alarm when there is missing object in the specified zone.
Step 1 Select
Main Menu
>
AI
>
Parameters
>
IVS
.