User's Manual
129
Step 1 On the expanded PTZ control panel, click to start moving in horizontal direction.
Step 2 Click again to stop moving.
5.6.7.4.6 Auxiliary Button
On the expanded PTZ control panel, click .
In the
Shortcut Aux
list, select the option that corresponds to the applied protocol.
In the
Aux No.
box, enter the number that corresponds to the AUX switch on the decoder.
Figure 5-40 Auxiliary
5.6.8 Wireless Pairing
You can use the wireless pairing to quickly add IPCs to the NVR.
Make sure that the IPC and NVR are on the same network segment.
Right-click the live page, and then select
Wireless Pairing
. The system starts a 120-second pairing
countdown. You can see the video of the paired IPC after pairing is successful.
To Next Page
Loading...
Need help?
General
