Dahua JRC-27F

User's Manual
187
3. Select the face database that you want to arm, and then click
OK
.
4. Click to modify similarity.
5. Click to configure alarm linkages.
●
Stranger Alarm
: The alarm is triggered when the similarity of detected faces does not
reach the defined value.
Figure 5-100 Stranger alarm (AI by recorder)
1. Select
Stranger Alarm
in
AI Mode
.
2. Click enable the function.
3. Configure the alarm linkage actions. For details on alarm linkage, see Table 5-43.
Step 5 Click
Apply
.
5.9.5.4.2 Configuring AI by Camera
Make sure the connected camera supports face recognition.
Step 1 Select
Main Menu
>
AI
>
Parameters
>
Face Recognition
.
Step 2 Select the channel, enable the function, and select
AI by Camera
in the
Type
list.