EasyManua.ls Logo

Dahua JRC-27F

Dahua JRC-27F
415 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User's Manual
238
Figure 5-151 People counting rule
2) Customize the rule name and then select direction.
3) Click
OK
.
Step 5 Click under
Parameters
and then configure the parameters.
Table 5-42 People counting parameters
Parameter Description
OSD
Select
Enter No.
, and then the number of people entering the
detection zone will be displayed on the live page.
Select
Exit No.
, and then the number of people leaving the detection
zone will be displayed on the live page.
Setting
Enter No.
: An alarm is triggered when the number of people entering
the detection zone exceeds the defined threshold.
Exit No.
: An alarm is triggered when the number of people leaving the
detection zone exceeds the defined threshold.
Stay No.
: An alarm is triggered when the number of people staying
the detection zone exceeds the defined threshold.
Step 6 Click under
Trigger
to configure alarm schedule and linkage. For details on alarm
linkage, see Table 5-43.
Step 7 Click
Apply
.
5.9.11.3 Configuring In Area No.
When the number of people in the detection area is larger or lower than the defined threshold, or
when the staying period exceeds the defined duration, an alarm is triggered.
Step 1 Select
Main Menu
>
AI
>
Parameters
>
People Counting
>
People Counting
.

Table of Contents

Related product manuals