User's Manual
126
Figure 5-36 Tour
Step 3 In the
Tour No.
box, enter the value for the tour route.
Step 4 In the
Preset
box, enter the preset value.
Step 5 Click
Add Preset
.
A preset will be added for this tour.
●
You can repeat adding more presets.
●
Click
Delete Preset
to delete the preset for this tour. This operation can be repeated to
delete more presets. Some protocols do not support deleting.
5.6.7.3.3 Configuring Patterns
Procedure
Step 1 On the expanded PTZ control panel, click .
Step 2 Click the
Pattern
tab.
To Next Page
Loading...
