Dahua JRC-27F User Manual

User's Manual
284
Step 2 Enable the UPnP function on the router.
Step 3 Connect the Device with the LAN port on the router to connect into the LAN.
Step 4 Select
Main Menu
>
NETWORK
>
TCP/IP
, configure the IP address into the router IP
address range, or enable the DHCP function to obtain an IP address automatically.
5.11.11.2 Configuring UPnP
Procedure
Step 1 Select
Main Menu
>
NETWORK
>
UPnP
.
Figure 5-196 UPnP
Step 2 Configure the settings for the UPnP parameters.
Table 5-58 UPnP parameters
Parameter Description
Port Mapping Enable the UPnP function.
Status
Indicates the status of UPnP function.
●
Offline: Failed.
●
Online: Succeeded.
LAN IP
Enter IP address of router on the LAN.
After mapping succeeded, the system obtains IP address automatically.
WAN IP
Enter IP address of router on the WAN.
After mapping succeeded, the system obtains IP address automatically.

Dahua JRC-27F Specifications

General

Brand	Dahua
Model	JRC-27F
Category	Network Hardware
Language	English