Dahua JRC-27F

User's Manual
260
6) Right-click the page to exit.
Step 4 Click
Setting
next to
Schedule
to configure the alarm schedule.
Step 5 Configure the anti-dither period.
If multiple alarms occur during the anti-dither period, the system only record the event
once.
Step 6 Configure alarm linkage. For details, see Table 5-43.
Step 7 Click
Apply
.
5.10.5.2 Video Loss
When the video loss occurs, the system performs alarm linkage actions.
Step 1 Select
Main Menu
>
ALARM
>
Video Detection
>
Video Loss
.
Figure 5-172 Video Loss
Step 2 Select a channel and then click to enable the function.
Step 3 Click
Setting
next to
Schedule
to configure the alarm schedule.
Step 4 Configure alarm linkage. For details, see Table 5-43.
Step 5 Click
Apply
.